Armour Detail Armour Quartz 30ml
Industry Leading 66% Solids 99.9% Purity Quartz Coating
Armour Quartz Coating is the new standard in ceramic protection, with a solids content of 66% (SiO2) at a purity of 99.9%, Armour Coating leads the way in consumer-available protective coatings in only a single layer!
The advanced formula of Armour Quartz Coating offers extreme chemical resistance and a level of gloss that is off the charts. The user-friendly application process ensures that even those with limited experience can achieve professional results, and the high water contact angles make maintaining the surface of your vehicle easier and safer. The increased resistance to stains, bugs, sap, etching, and scratches means that your vehicle will be protected from a variety of potential threats, and the exceptionally slick-to-the-touch surface helps repel dirt and maintain a clean appearance.
The versatility of Armour Quartz Coating is unparalleled, as it can be safely applied to all painted, chrome, and plastic trim surfaces. With a real-world protection of 3+ years in a single layer, the coating provides a long-term solution for protecting your vehicle and keeping it looking its best. Whether you are a seasoned professional or a first-time user, Armour Quartz Coating is the ideal choice for anyone looking to enhance the appearance and protection of their vehicle.
What's Included:
30ml Armour Quartz Coating w/ Dropper Top
(1) Microfiber Coating Application Pad
"How To" Direction Card
Directions:
1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way.
2. Apply Armour Coating 1-2 panels at a time. Initially create an "X" pattern on the panel, then box in all edges to allow for even distribution of the coating. Follow through the panel using small overlapping circles (like a wax) making sure to have even, level coverage. Allow the product to “set up” for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for uniform small sweat beads to appear before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.
4. Halfway through the vehicle or as the applicator starts to harden, flip the applicator over to a fresh side.
5. Use a fresh side of the towel every other panel.
Armour Quartz Coating was designed as a single layer coating, however, it can be layered. If you wish to apply multiple layers allow 1-2 hours between layers.
Free over $100, or will be calculated during checkout.
Free over $100, or will be calculated during checkout.
Armour Detail Armour Quartz 30ml
Industry Leading 66% Solids 99.9% Purity Quartz Coating
Armour Quartz Coating is the new standard in ceramic protection, with a solids content of 66% (SiO2) at a purity of 99.9%, Armour Coating leads the way in consumer-available protective coatings in only a single layer!
The advanced formula of Armour Quartz Coating offers extreme chemical resistance and a level of gloss that is off the charts. The user-friendly application process ensures that even those with limited experience can achieve professional results, and the high water contact angles make maintaining the surface of your vehicle easier and safer. The increased resistance to stains, bugs, sap, etching, and scratches means that your vehicle will be protected from a variety of potential threats, and the exceptionally slick-to-the-touch surface helps repel dirt and maintain a clean appearance.
The versatility of Armour Quartz Coating is unparalleled, as it can be safely applied to all painted, chrome, and plastic trim surfaces. With a real-world protection of 3+ years in a single layer, the coating provides a long-term solution for protecting your vehicle and keeping it looking its best. Whether you are a seasoned professional or a first-time user, Armour Quartz Coating is the ideal choice for anyone looking to enhance the appearance and protection of their vehicle.
What's Included:
30ml Armour Quartz Coating w/ Dropper Top
(1) Microfiber Coating Application Pad
"How To" Direction Card
Directions:
1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way.
2. Apply Armour Coating 1-2 panels at a time. Initially create an "X" pattern on the panel, then box in all edges to allow for even distribution of the coating. Follow through the panel using small overlapping circles (like a wax) making sure to have even, level coverage. Allow the product to “set up” for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for uniform small sweat beads to appear before removing.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.
4. Halfway through the vehicle or as the applicator starts to harden, flip the applicator over to a fresh side.
5. Use a fresh side of the towel every other panel.
Armour Quartz Coating was designed as a single layer coating, however, it can be layered. If you wish to apply multiple layers allow 1-2 hours between layers.
Free over $100, or will be calculated during checkout.
Free over $100, or will be calculated during checkout.
THOR Exclusive Brands
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Clean by Pan the Organizer is a premium, custom brand crafted personally by Pan himself. From shampoo to ceramic coatings, each product has undergone multiple revisions to ensure they meet Pan's high standards of excellence.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.
Conceived by Eddie and Jamie, our goal was to create a brand where quality meets affordability. We wanted to empower you to take control of your business and finances, leading to the creation of Detail Co. We uphold high standards without the high prices, serving the community with exceptional value.